#define CCDCMUX (0x81C) in ccdc_dm355.h

gds7415

Could not fine any register with address 0x01C7081C in DM355 VPFE documentation.

This register is used in ccdc_reset().

regw_bl(0x00, CCDCMUX); /*CCDC input Mux select directly from sensor */

0 BrandonAzbell over 16 years ago

This register is defined in a similar device using the same VPFE module. The reset value for this register is 0x00 anyway.

You should be able to safely remove this code statement from the ccdc_reset() for the DM355.

0 gds7415 over 16 years ago in reply to BrandonAzbell

Thank you.

Processors forum