PROCESSOR-SDK-OMAPL138: About switching GEL.

userasagonta55

Intellectual 350 points

Part Number: PROCESSOR-SDK-OMAPL138
Other Parts Discussed in Thread: OMAPL138

We have several projects available for testing, but is it possible to switch gelfor each project?

Tell me if you know anyone.

over 6 years ago

0 Yordan Kovachev over 6 years ago

TI__Guru**** 161600 points

Hi,

Gel file is loaded once, when you initialize your debug environment in CCS.

Best Regards,
Yordan

0 Koichiro Tashiro over 5 years ago in reply to Yordan Kovachev

TI__Mastermind 22945 points

Hi,

You can specify GEL file loaded at device connection in target configuration file(*.ccxml).
Please check the "Advanced" tab in Target Configuration window.
(below figure is for MSP432, but it is similar to OMAPL138 as well.)

Thanks and regards,
Koichiro Tashiro

0 userasagonta55 over 5 years ago in reply to Koichiro Tashiro

Intellectual 350 points

Yordan,Koichiro Tashiro.

Your proper advice has solved it alright.
Thank you very much.

Processors

Processors forum

PROCESSOR-SDK-OMAPL138: About switching GEL.