CCS/PROCESSOR-SDK-OMAPL137: CCS Version option

Dan Ringger

Tool/software: Code Composer Studio

We’re currently using the XDS510 USB plus for a debugger with CCS version 9.10.0.00010. If we could get any advice as to whether this is still our best option or what the other options would be. We are using the OMAPL137DZKBT3. Thank you

over 5 years ago

0 Sahin Okur over 5 years ago

TI__Mastermind 27355 points

Hello Dan,

The XDS510 class debug probes are not supported on CCS v9.0+ (please see release notes here: http://software-dl.ti.com/ccs/esd/documents/ccs_downloads.html)

You can either downgrade to CCS v8.3.1 to maintain 32-bit compatibility with the XDS510, or select another debug probe from the table here: http://www.ti.com/design-resources/embedded-development/ccs-development-tools.html#debug

Regards.
Sahin

Processors

Processors forum

CCS/PROCESSOR-SDK-OMAPL137: CCS Version option