We have the TI SITARA AM335X board.
We are using the Linux Kernel and u-boot.We would like to the perform the NAND operation through Linux Kernel/U-boot
Please let us know the steps for NAND flash read, write and erase operation
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We have the TI SITARA AM335X board.
We are using the Linux Kernel and u-boot.We would like to the perform the NAND operation through Linux Kernel/U-boot
Please let us know the steps for NAND flash read, write and erase operation
Hello Amit,
Was the above link helpful? If so, please close this thread by clicking on "This resolved my issue" button.
Best regards,
Kemal
No.. I am not able to create the partition on NAND flash and not able to perform the read, write and erase operation.
Could you please guide us on creating the partition on the NAND flash and in turn to perform the read, write and erase operation. What are the flags(configuration) to be enable and other settings to be made in the u-boot and linux kernel .. so that I can able to perform the read, write and erase operation from user space.
Hello Amit,
Please, close this thread by clicking on "This resolved my issue" button and open a new thread for your new question.
Best regards,
Kemal