TDA2E: VisionSDK documentation

e3g2ma

Intellectual 260 points

Part Number: TDA2E

Dear Person in charge,

Can we expect consistent VisionSDK documentation in nearest future?

Can we expect VisionSDK ported also for AM572x SoC family?

Best regards,

Konstantin

over 6 years ago

0 Rishabh Garg over 6 years ago

TI__Guru 55685 points

Hi Konstantin,

What do you mean by consistent documentation? In case you have found any discrepencies do let us know so that we can correct them.

Currently there are no plans to port Vision SDK to AM572x.

Regards,

Rishabh

0 e3g2ma over 6 years ago in reply to Rishabh Garg

Intellectual 260 points

Hello Rishabh,

As I discussed at https://e2e.ti.com/support/processors/f/791/t/863002 the VisionSDK documentation is inconsistent in the sense of TI-RTOS and Linux supervising. It is really hard to use so I am asking for.

Best regards,

Konstantin

0 Anuj Gupta over 6 years ago in reply to e3g2ma

TI__Genius 15985 points

Hi,

We have updated this section in our userguide for TI-RTOS.

It will be a part of 3.08 release.

Below section is added

The Linux installer for the GCC Arm tools for building OpenVX should be downloaded from below link
releases.linaro.org/.../gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf.tar.xz
The tools need to be installed under
$INSTALL_DIR/ti_components/os_tools/linux/linaro/
IMPORTANT NOTE: This toolchain is only required when building OpenVX package. A15 Compiler and linker MUST be installed before initiating the build else compilation will fail. Also make sure the compiler is installed at the exact path mentioned above after installation of vision sdk.
Use following steps to install the toolchain $> cd $INSTALL_DIR/ti_components/os_tools/linux/linaro $> tar –xvf gcc-linaro-5.3-2016.02-x86_64_arm-linux-gnueabihf.tar.xz

Regards,

Anuj

0 e3g2ma over 6 years ago in reply to Anuj Gupta

Intellectual 260 points

Hello Anuj,

Thanks. Closed.

Best regards,

Konstantin

Processors

Processors forum

TDA2E: VisionSDK documentation