CCS: Need information on build and flashing steps by using CCS for PDK examples(TDA3x - DSS)

vineel kumar

Tool/software: Code Composer Studio

we are using PDK (pdk_01_10_03_07) pacakge for "DSS" example ,but we need information on build and flashing steps by using CCS(Code Composer Studio) tool for TDA3x.

over 5 years ago

0 Rishabh Garg over 5 years ago

TI__Guru 55685 points

Hi,

Can you refer to SBL user guide: https://processors.wiki.ti.com/images/b/b7/TDA_SBL_UserGuide.pdf

Regards,

Rishabh

0 vineel kumar over 5 years ago in reply to Rishabh Garg

Prodigy 130 points

Hi Rishabh,

Thanks for your response .

We have referred above link and couldn't find any information on CCS tool to run and flashing for PDK example application.

Could you please share the CCS tool specific steps for PDK(TDA3x) example application(DSS).

Regards

Saivineel.M

0 Rishabh Garg over 5 years ago in reply to vineel kumar

TI__Guru 55685 points

Hi,

There are no CCS tools to flash.

You need to use QSPI/NOR flash writer utility which is part of PDK.

For details you can see 5.1 Flash Tools of above mentioned document.

Regards,

Rishabh

Processors

Processors forum

CCS: Need information on build and flashing steps by using CCS for PDK examples(TDA3x - DSS)