Flashing ARM Application Image

chandra telka

Other Parts Discussed in Thread: OMAP-L137

I am using OMAP-L137 EVM board. I could able to flash dsp_ubl.bin , arm_ubl.bin and u-boot.bin into the board and it is working fine.

But inplace of u-boot If I tried flash arm application(led blinking application from csk examples),it is not working.

Please let me know that how I do this.

over 14 years ago

0 jc-ti over 14 years ago

TI__Mastermind 27585 points

Have you tried converting the application image to AIS format using AISGen and flashing it at address 0, and not flashing the UBL? There is a debug gel file that will be helpful to you:

http://processors.wiki.ti.com/index.php/OMAP-L1x_Debug_Gel_Files

Otherwise you will have to get the UBL code from the PSP and step through it to see the jump happens to your code correctly.

Jeff

Processors

Processors forum

Flashing ARM Application Image