• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 505 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: Use cadence systemSI simulate PCB the serdes 1 IBIS_AMI module input error.

Tao Han
Expert 6425 points
Part Number: TDA4VM

Hi experts:

Our customer use Cadence Sigrity systemSI 18.0.1 X64 version simulate tools check their Serdes 1 layout. Use CDDS contain IBIS_AMI module, systemSI input those module report error. 

Please give us some suggest about how to use IBIS_AMI module.

Whether can share EVM board simulation results with customer?

Best Regards!

Han Tao

Below are customer use systemSI version and software report error.

  • 0
    TI__Mastermind 38300 points

    Hi,

    Copying questions from the simulation expert below:

    What OS is being used for the simulation?

    What is the version number for the IBIS-AMI models used?

    Best regards,
    Kevin

  • 0 in reply to Kevin S
    TI__Guru 54382 points

    Hello Tao,

    We received the following guidance from Cadence:

    There is one pre-requisite for running the AMI models with System SI – we need to install Visual Studio Community 2013 on your laptop – this does not require any license.

      

    Here are the Steps:

    1.       Go to the following page:

     

    https://www.visualstudio.com/en-us/news/vs2013-community-vs.aspx

     

    2.       Click on the Download Visual Studio Community 2013 Link.

     

    3.       This will download the setup file (vs_community.exe) – run this file to install Visual Studio 2013.

     

    4.       Launch Visual Studio 2013 once – it will ask for a one-time setup of Environment settings.  Select Visual C++ and click on Start Visual Studio. This will configure Visual Studio for future use.

     

     

    Also ensure that the LIBPATH setting in the setup is accurate.

    Regards,

    Kyle

  • 0 in reply to kcastille
    TI__Expert 6425 points

    Hi Kyle:

    Thanks for check it with Cadence team.

    Has forward those solution to customer and waiting their feedback.

    Best Regards!

    Han Tao