AM3359: PRU Ethernet question

Pankaj,

The functions in the enet_phy.c is built into board library and used in project like ICSS_EMAC or CPSW emac drivers, which may not be obvious to applications.

Regards,
Garrett

Garrett,

Without ti/board/src/<Board>/device/enet_phy.*  files I am able to execute PRU based RTOS applications ?

I am not able to see, its used in anywhere in ICSS_EMAC Project Examples.

Its not required in RTOS applications ?

Regards,

Pankaj

Pankaj,

For AM335x icev2, the ti/board/src/<Board>/device/enet_phy.*  files are used for CPSW, and not used in ICSS_EMAC Project Examples.

The file packages\ti\board\src\icev2AM335x\icev2AM335x_ethernet_config.c contains the ICSS EMAC PHY configurations for ICSS_EMAC on AM335x icev2.

Regards,
Garrett

Hi Garrett,

I want to use "DP83822" instead of TLK110 , In which file changes should be expected.

I think only packages\ti\board\src\icev2AM335x\icev2AM335x_ethernet_config.c these file should be change for PRU_ICSS.

Regards,

Pankaj

Garrett,

Thanks for confirmation.

Where is pinmux file or pimux configuration that i need to change ?

Regards,

Pankaj