1808 PCB questions

Anonymous

Other Parts Discussed in Thread: AM1808

Hi All,

For 1808 experimenter's kit which seems to be made by LogicPD

Do they provide PCB source files (Altium Designer/WProtel, Orcad, Autocad, etc.) within the package? Or is it obtainable from them?
Where can one get the footprint file (used in PCB designing) for AM1808?
AM1808 has 256 pins, so how many layers of PCB boards are needed? How many layers does the experiment kit (http://focus.ti.com/docs/toolsw/folders/print/tmdxexp1808l.html) have?

Thanks,

Zheng

over 14 years ago

0 BrandonAzbell over 14 years ago

TI__Guru 64460 points

Zheng Zhao said:

Do they provide PCB source files (Altium Designer/WProtel, Orcad, Autocad, etc.) within the package? Or is it obtainable from them?

I would suggest registering on LogicPD's website for the collateral. If the information you desire is not available, then you would need to request that info from LogicPD.

Zheng Zhao said:

AM1808 has 256 pins, so how many layers of PCB boards are needed? How many layers does the experiment kit (http://focus.ti.com/docs/toolsw/folders/print/tmdxexp1808l.html) have?

The AM1808 datasheet has some information about PCB stack up and how many layers. Section 6.11.3.3 talks about the DDR interface, but gives some of that information.

Regarding the Experimenter's kit, there should be information on LogicPD's website when you register which can provide this information.

0 Anonymous over 14 years ago in reply to BrandonAzbell

Dear Brandon,

Many thanks for the answer. I will contact them.

Zheng

0 Anonymous over 14 years ago in reply to BrandonAzbell

Dear Brandon,

The relevant section information is very useful. Thanks.

Zheng

0 Jorge Sanchez2 over 10 years ago in reply to BrandonAzbell

Prodigy 60 points

I have the same issue Zheng had, but now that file seems to be removed or lost.

0 Senthilkumar Srinivasan over 10 years ago in reply to Jorge Sanchez2

TI__Mastermind 43660 points

Hello Jorge,

Could you please create a new thread and elaborate the issues you are facing ?

This thread is already closed and get less attention.

Regards,

Senthil

Processors

Processors forum

1808 PCB questions