Tool/software: Code Composer Studio
Good morning sir,
Sir im doing noise cancellation project in real time using TMS320C6713 dsk board.
Sir from the function generator how much amplitude signal wiil give to the DSk board Codec via LINE in
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: Code Composer Studio
Good morning sir,
Sir im doing noise cancellation project in real time using TMS320C6713 dsk board.
Sir from the function generator how much amplitude signal wiil give to the DSk board Codec via LINE in
Hello Turpati,
From C6713 DSK user manual, you can see Line In is connected to AIC23 codec:
http://c6000.spectrumdigital.com/dsk6713/revc/files/6713_dsk_techref.pdf
From AIC23 codec datasheet, you can see Line in is connected to ADC.
http://www.ti.com/lit/ds/slws106h/slws106h.pdf
Chapter 2.3 describes the Electrical Characteristics over Recommended Operating Conditions. Please take a look.
For your convenience, I also copied/pasted here:
best regards,
David Zhou