TMDSIDK574: eMMC programming

Ratheesh Krishnan

Prodigy 220 points

Part Number: TMDSIDK574
Other Parts Discussed in Thread: AM5749

Hi Team,

Please support me in installing processor sdk to the eMMC NAND Flash.

please mension the steps to do so.

currently we installed SDK in SD card, connect SD card to TMDSIDK574x kit and using.

How to start with EVE and DSP in Application Development.

support immediately

over 5 years ago

0 Biser Gatchev-XID over 5 years ago

TI__Guru**** 393215 points

Hi,

Which SDK are you using - Linux or RTOS?

0 Ratheesh Krishnan over 5 years ago in reply to Biser Gatchev-XID

Prodigy 220 points

Hi Team,

SDK using: am57xx-evm-linux-rt-06.02.00.81

0 Ratheesh Krishnan over 5 years ago in reply to Ratheesh Krishnan

Prodigy 220 points

Hi Team,

How to start development using Processor SDK Linux-rt.

Please mension the steps to do so.

0 Schuyler Patton over 5 years ago in reply to Ratheesh Krishnan

TI__Mastermind 40360 points

Hi,

Please see this documentation link that describes how to get started with the Processor SDK Linux from Texas Instruments. Please note this will work for the Linux RT as well. Linux RT application examples can be searched and found on the web.

Best Regards,

Schuyler

0 Ratheesh Krishnan over 5 years ago in reply to Schuyler Patton

Prodigy 220 points

Hi Team,

What mentioned in the document is for some other board not for AM5749. eMMC NAND Flash is external to processor. how to install sdk in eMMC NAND Flash. please mension the commands to install sdk.

Please support me to use TIDL api with python. how to install TIDL library in python environment.

regards,

Ratheesh

0 Schuyler Patton over 5 years ago in reply to Ratheesh Krishnan

TI__Mastermind 40360 points

Hi,

I apologize for the delay in answering the question. If I understand correctly installing the SDK on the AM574x will not work since the installer is an x86 executable that will not run on the arm on the AM574x.

How are you trying to use the AM574x do you want to build your application on the EVM or your board?

Best Regards,

Schuyler

Processors

Processors forum

TMDSIDK574: eMMC programming