• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 421 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Issue with ubl AIS file creation - DM6467T

K Md Feroz Irfan
Expert 7225 points

Hello Champs,

 

I get error saying file not sound, shown in red below.

 

http://processors.wiki.ti.com/index.php/DM6467_EVM_Installation#Steps_for_Building_UBL

 

D:\VMShare\dm6467t\Images\flash-utils-dm646x\flash-utils-dm646x\tools\util>makeublrom.bat

 

D:\VMShare\dm6467t\Images\flash-utils-dm646x\flash-utils-dm646x\tools\util>echo

off

Translating Image/ublDaVinci.out to ASCII-Hex format...

   "Image/ublDaVinci.out"   ==> .boot

   "Image/ublDaVinci.out"   ==> .text

   "Image/ublDaVinci.out"   ==> .const

>> WARNING: section '.const' was padded by 2 bytes to a size of 200 to satisfy

            the specified memory width of 4

   "Image/ublDaVinci.out"   ==> .cinit

Found entry point in ublDaVinci.map at 00000100

The system cannot find the file specified.


What is is the issue? Please let em know and update wiki....


Thanks & Best Regards

Feroz

 


  • 0
    TI__Expert 7225 points

    All,

     

    I played with the perl file and the UBL and created manaully the ublDavinci.log file in the tools/util folder.

     

    Now I dont get the system error, buit the log is file is still  empty. 

     

    Have I done it right?

     

    I do see a ublDavinci.bin file created in util folder.

     

    Best Regards
    Feroz