Compiler/TDA2EVM5777: 1080p camera module

Tn Zaku02

Part Number: TDA2EVM5777

Tool/software: TI C/C++ Compiler

Hi Expert,
I'm running PROCESSOR SDK VISION v03.05.00 rtos on XC5777X CPU BOARD.

Referring usecase: Chains_lvdsVipMultiCam_Display and Chains_vipSingleCam_Display, is worked.
Camera configuration are 720p. How about hardware and software when want change to 1080p?

Please recommend a camera 1080p module that can be used on evm.

Could you please provide some guide on these questions?

Thanks in advance.

over 5 years ago

0 Brijesh Jadav over 5 years ago

TI__Guru**** 478185 points

Hi,

We use OV10635 camera on EVM for LVDS based capture..

Rgds,

Brijesh

0 Tn Zaku02 over 5 years ago in reply to Brijesh Jadav

Intellectual 880 points

Hi,

Does OV10635 only support 720p?

Is there a usecase for reference?

Rgds,

0 Brijesh Jadav over 5 years ago in reply to Tn Zaku02

TI__Guru**** 478185 points

Hi,

I think it supports slightly higher resolution than 720p. But in this case, please check with Omnivision.

Yes, all VIP based usecases in vision sdk uses OV10635 sensor.

Rgds,

Brijesh

Processors

Processors forum

Compiler/TDA2EVM5777: 1080p camera module