TDA4VM: Changes in Device tree after switching the boot from emmc

Manish Ahlawat

Part Number: TDA4VM

Hello Sir/Mam,

I wanted to ask a related question to this . Do i need to change something in the Device tree or drivers ? I see that there is a emmc_registers.h file where there is a define MMC_CH0 set to 0 and wanted to know if there has to be something changed in the SDK.

Regards

Manish

over 6 years ago

0 Vishal Mahaveer over 6 years ago

TI__Mastermind 33930 points

Hi Manish,

No device tree or driver changes are needed for switching to eMMC boot.

Below e2e posts give details on eMMC boot steps
u-boot --> https://e2e.ti.com/support/processors/f/791/p/886980/3282312#3282312
Kernel/file system --> https://e2e.ti.com/support/processors/f/791/p/887773/3290796#3290796

Regards,
Vishal

Processors

Processors forum

TDA4VM: Changes in Device tree after switching the boot from emmc