Unable to detect device while flashing boot images into eMMC through fastboot

Vamsi Krishna Pelluru

Hi,

I am trying to run android on jacinto 6, while flashing prebuilt android images into eMMC through fastboot i am getting a " No Device Detected " log when i run "sudo ./fastboot.sh" in emmc_files path on linux pc.

Procedure followed to fastboot:

1,Rebooted the device and interrupted the boot process by pressing any key.

2.Entered "fastboot 0" in the board terminal.

3.Ran "sudo ./fastboot.sh" in emmc_files path on linux pc

I tried following solutions

1.searched for TI board by entering "lsusb" but haven't found the device

2.Tried connecting board with all USB 2.0 ports on the pc

please suggest me solution for detecting the board

Thanks,

-Vamsi.

over 5 years ago

0 Yordan Kamenov over 5 years ago

TI__Mastermind 42515 points

Hi Vamsi,

which Android version you try to flash?

Also can you confirm you connect USB 2.0 to micro USB port on the board?

Regards,

Yordan

0 Vamsi Krishna Pelluru over 5 years ago in reply to Yordan Kamenov

Prodigy 80 points

Hi Yordan,

Android Version which I'm trying :- Android™ Oreo™ MR1 8.1 (OPM1.171019.021) .

Yes I'm board to pc through USB 2.0 to micro USB port.

Regards,

-Vamsi.

0 Vishal Mahaveer over 5 years ago in reply to Vamsi Krishna Pelluru

TI__Mastermind 33410 points

Hi Vamsi,

- Is this regular Linux PC or virtual box?
- Can you try another PC?

Regards,
Vishal

Processors

Processors forum

Unable to detect device while flashing boot images into eMMC through fastboot