BEAGLEBOARD-X15: Beaglebone Black boot process

Shwetha Narayan

Part Number: BEAGLEBOARD-X15

Hi,

In Beaglebone Black, once the system is powered through USB, how does the system starts booting?

Does the PWR_EN pin of the PMIC in the evaluation kit goes high and the WAKEUP pin goes low, if no programming is done in the PMIC and it is not in the sequence mode?

Regards

Shwetha

over 5 years ago

0 Biser Gatchev-XID over 5 years ago

TI__Guru**** 393215 points

Hi,

Beaglebone Black uses the TPS65217C PMIC. The information you are looking for is provided in the PMIC documentation, available on the product page: https://www.ti.com/product/TPS65217

0 Shwetha Narayan over 5 years ago in reply to Biser Gatchev-XID

Prodigy 240 points

Hi biser,

We are using the D series of the PMIC.

There is only a few difference between the C and D series.

Regards

Shwetha

Processors

Processors forum

BEAGLEBOARD-X15: Beaglebone Black boot process