DA830 support PRUSS?

j-breeze

Other Parts Discussed in Thread: OMAP-L137, DA8XX

Dose DA830 officially support PRUSS?
There are no PRUSS related descriptions in DA830 Datasheet. But DA830 DSP core must use it to boot ARM core in the same way as OMAP-L137.

Thanks in advance for your information.

Best regards, j-breeze

over 14 years ago

0 dabuan over 14 years ago

TI__Genius 14545 points

J-Breeze,

Let me check with the Aureus Audio Team. I'll reply shortly.

0 Tufino over 14 years ago in reply to dabuan

TI__Intellectual 2350 points

Hello,

DA830 actually DOES support PRUSS, although we have not yet exposed it in the documentation. We are planning to do so at some point this year, but haven't gotten around to it yet. That being said, the documentation for PRUSS in the L137 documentation applies to DA830 as well.

Thanks,

Bobby T.

0 Rajarama M Bhat over 13 years ago in reply to Tufino

Intellectual 550 points

Hi,

I have a similar doubt. Does DA828 and DA808 also support PRUSS? We are planning to use DA828 initially for our system and later replace it with DA808..We wanted to know if PRUSS of these devices can be used for McASP.

Thanks in advance,

Rajaram

0 Mukul Bhatnagar over 13 years ago in reply to Rajarama M Bhat

TI__Guru* 83935 points

Hi Rajaram

There are no plans to support the PRUSS as is supported on the OMAPL1x/C674x family on the DA8xx family. Can you please contact the local field sales office to provide us more info on your end application and possibly exploring the use of OMAPL1x/C674x instead of DA8xx if using PRU is a must have etc.

Regards

Mukul

Processors

Processors forum

DA830 support PRUSS?