Linux/AM5749: How to program Board Identity Memory

Hi Oleg,

Oleg Solovev said:

I would like to program  Board Identity Memory ..so how I can do it? Maybe you have some special configurator or manual for it?

1) Do you mean the EEPROM that is used for board identification?
2) Are you asking for how to program the EEPROM for board identification?

Best Regards,
Keerthy

Hello Keerthy,

Yes exactly...I am talking about eeprom

BR,

Oleg

Hello Robert,

Please give me a link or which exactly document which page. I will check this information. Like I sad: I USE CUSTOM BOARD and it is mean I have empty eeprom.

BR,

Oleg

The EVM User Guide is located here:  

The EEPROM details are located in Section 4.3 SEEPROM Header

Hi Robert,

Excellent!!!! this is the best instruction I've seen.....Explain how should I flash the memory? Maybe I should have a programmer or I can do it through U-boot

i2c md commands? Guys when you start to working and make a good documentation understandable for beginners??? Do the documentation like for EMIF configuration...I've spend a week to set the correct configuration and the board finally boots.

BR,

Oleg

Hi Oleg,

Glad to know that it solves your problem.

We have taken note of your request we will take steps to improve this going forward.

Thanks Robert.

Happy to help!

Regards

Karthik