OMAP 4, TI Blaze The x-loader signing tool

Tonatiuh Monroy

Hi I am working on the Blaze platform and I want to install Froyo with kernel 2.6.32, but to do so, at the moment of building the x-loader it says that i have to sign it first

"The tool for signing x-loader is provided on TI's package. Please contact TI customer representative to get access to this tool"

Where can i get this tool?

Thank You

over 14 years ago

0 Chris Kane over 13 years ago

TI__Prodigy 60 points

Hi Tonatiuh ,

Please refer to this thread as it seems to be the same question. ( about generate_MLO , http://e2e.ti.com/support/omap/f/849/t/143454.aspx#517704 )

Regards,

Chris

0 raj kumar5 over 11 years ago in reply to Chris Kane

Intellectual 360 points

Hi Chris,

We are using TI Blaze (ompa4430) which is HS device. I am new to secure boot.

I want to know , in order to support secure boot,

do we need to make only X-loader as signed image or u-boot and uImage should be signed one?

Do you have the procedure to perform secure boot? please let me know.

thanks

Raj

Processors

Processors forum

OMAP 4, TI Blaze The x-loader signing tool