CCS/TDA4VM: Regarding erasing of eMMC over debugger

Manish Ahlawat

Part Number: TDA4VM

Tool/software: Code Composer Studio

Dear Ti,

We have primary boot mode set as eMMc and secondary as SD Card. In order to erase eMMC i need to reach u-boot prompt but i am not able to as eMMC doesn't have it right.

Is there any way i can erase eMMc over debugger with CCS ?

Regards

Manish

over 6 years ago

0 Vishal Mahaveer over 6 years ago

TI__Mastermind 34120 points

Hi Manish,

How about using the method described in previous query to update correct images?
https://e2e.ti.com/support/processors/f/791/p/898360/3322707#3322707

Regards,
Vishal

0 Manish Ahlawat over 6 years ago in reply to Vishal Mahaveer

Expert 2120 points

Hi Vishal,

Can it be used also if the u-boot prompt is not coming ?

0 Vishal Mahaveer over 6 years ago in reply to Manish Ahlawat

TI__Mastermind 34120 points

Depends on where the boot is stuck. If you are able to connect to A72, then you can use it.
What other boot modes are supported on the board?

Processors

Processors forum

CCS/TDA4VM: Regarding erasing of eMMC over debugger