How to make OMAP3530 or DM3730 Board to support up to 512MB DDR RAM on WinCE 6.0 BSP

phoenixtju

Other Parts Discussed in Thread: DM3730, OMAP3530

Hi, all

I want to make OMAP3530 or DM3730 Board to support up to 512MB DDR RAM on WinCE 6.0 BSP , would somebody here give me some advices?

Thanks

over 13 years ago

0 Adeneo Embedded support team over 13 years ago

Mastermind 9310 points

There are several places where you need to modify the BSP:

- Modify the DDR initialization in XLDR to match your DDR part banks size and timings

- Modify \WINCE600\PLATFORM\EVM_OMAP3530\SRC\INC\addrtab_cfg.inc to map the extended memory range in virtual space

- Modify \WINCE600\PLATFORM\EVM_OMAP3530\FILES\config.bib and \WINCE600\PLATFORM\EVM_OMAP3530\SRC\INC\image_cfg.h to reserve memory areas in the new memory space

Good luck

0 phoenixtju over 13 years ago in reply to Adeneo Embedded support team

Expert 1600 points

Hi,

Thanks.

I will have a try.

0 MGun over 13 years ago in reply to phoenixtju

Intellectual 895 points

Also consider the following file (BUILDTTB, line 40):

\WINCE600\PLATFORM\IMT_3530\SRC\BOOTLOADER\EBOOT\startup.s

0 wang wj over 13 years ago in reply to phoenixtju

Prodigy 50 points

Hi, phoenixtju

I am also meet the problem,and donnot how to config the config.bib and addrtab_cfg.inc

have you soluted the problem?

0 phoenixtju over 13 years ago in reply to wang wj

Expert 1600 points

Hi,

I am still trying to make it work.

0 wang wj over 13 years ago in reply to phoenixtju

Prodigy 50 points

My email box is xiaosan5871@126.com

If you have good sugesstions ,tell me pelase.Also we can have a talk to solute the problem together.

Processors

Processors forum

How to make OMAP3530 or DM3730 Board to support up to 512MB DDR RAM on WinCE 6.0 BSP