DRA726: Bug in SysConfig

Michel Catudal

Part Number: DRA726
Other Parts Discussed in Thread: SYSCONFIG

I switched to the SysConfig program for my pinmux

If I enter data for I2C6 I get these kind of errors when trying to generate genericFileFormatIOdelay.txt or genericFileFormatPadConf.txt, I do not otherwise

same for boardPadDelayInit.c or boardPadDelayTune.h

Failed to save generated files

TypeError: Cannot read property 'indexOf' of undefined
Hide Details...

at getManualModesAltMode (eval at <anonymous> (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:34:106534), <anonymous>:35572:22) at eval (eval at <anonymous> (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:34:106534), <anonymous>:37146:17) at i.allowScriptPathAccess (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:44:337951) at Object.t.allowScriptPathAccess (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:34:166401) at Object.t.runTemplate (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:44:337925) at Promise (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:44:337175) at new Promise (<anonymous>) at t.CodeGenerator.generate (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:44:336829) at Promise.all.r.map.e (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:44:337278) at Jt (chrome-extension://nmafpdihnpfgdmpckjdpdgjmengbnjho/dist/ui.js:9:5767)

Michel Catudal

ACTIA Corp

over 5 years ago

0 Keerthy J over 5 years ago

TI__Guru**** 168820 points

Hi Michel,

Do you want to derive the IODelay values for these pins?
If yes then sysconfig will not give us the IODelay values.

Best Regards,
Keerthy

0 Michel Catudal over 5 years ago in reply to Keerthy J

Genius 3825 points

Keerthy,

That was mostly for the pin entries in u-boot. The delay generated for the design were rather small, it looks like just the HDMI and Ethernet so I didn't expect one for the I2C port

Is there supposed to be one?

I had to enter the pin information by hand using the datasheet.

On our new hardware we will be taking I2C6 out but that is at least a year away from now.

Michel Catudal

ACTIA Corp

0 Keerthy J over 5 years ago in reply to Michel Catudal

TI__Guru**** 168820 points

Hi Michel,

So i am not understanding if you are blocked on something with this tool issue? May i know
the exact need?

Best Regards,
Keerthy

0 Michel Catudal over 5 years ago in reply to Keerthy J

Genius 3825 points

Keerthy,

I wasn't blocked by it. I just mentioned that you have a bug in the tool.

I had to remove the part about I2C6 for it to work and then look in the datasheet to get the correct information.

Basically the tool is useless for getting the correct entries for I2C6

Michel Catudal

ACTIA Corp

0 Keerthy J over 5 years ago in reply to Michel Catudal

TI__Guru**** 168820 points

Hi Michel,

Thanks i reproduced it at my end. I checked dra74 dra76 and none of them have i2c6 option
itself. So this is a bug in the tool & i will report that to the internal team. I believe below is the exact error
you are reporting.

Thanks for bringing this up. If you are not blocked you can resolve this. I will get this reported to the internal team that works on this.

Best Regards,
Keerthy

0 Keerthy J over 5 years ago in reply to Keerthy J

TI__Guru**** 168820 points

Hi Michel,

I have raised this internally with the team and will be fixed in due time.
I am closing this thread.

Best Regards,
Keerthy

Processors

Processors forum

DRA726: Bug in SysConfig

Failed to save generated files