• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ccsv4 flash utilities for dm3730 evm

lokesh kumar65677
Intellectual 550 points
Other Parts Discussed in Thread: DM3730

Hello everybody,

 

Can any one give me the link/source for the ccsv4 based gel files,configuration files and nand/sd  writer/eraser source files for dm3730 evm. Also give me the link for ubl and uboot bin files for dm3730 evm.

I went through the internet,but i didn't get these files.

 

Thanks in advance

Best regards,

Lokesh

  • 0
    Intellectual 550 points

    Hi all,

    I  am trying to flash DM3730 board(EVM board) using XDS510 USB JTAG  Emulator .

    Resources i am using :

    1.DM3730 board

    2. XDS510 Jtag Emulator

    3. Code Composer Studio 4.2.1.00004

    We wrote a custom .out file for flashing

    Following are the Switch settings i have followed

    For NAND Flashing SW4 is set to "11100000" & SW1 is set to "10000000"

    I am not getting u-boot prompt after flashing x-load.bin.ift [at 0x00 address] and u-boot.bin [at 0x20000] taken from AM/DM3730 SDK package .

    Can anyone help me to flash up the board correctly.

     

    Advance Thanks

    Regards

    Lokesh