AM5718: am5718idk-processor SDK

khushboo singh

Intellectual 890 points

Part Number: AM5718

Hi,

Now I want to u-boot write using dfu in emmc. But

git clone https://git.omapzoom.org/repo/omapboot.git command is not getting connected.

I also tried git clone git://git.omapzoom.org/repo/omapboot.git, but same problem. Kindly help me out.

over 5 years ago

0 Keerthy J over 5 years ago

TI__Guru**** 170660 points

Hi Khushboo,

I am able to clone:

git clone git://git.omapzoom.org/repo/omapboot.git
Cloning into 'omapboot'...
remote: Counting objects: 3708, done.
remote: Compressing objects: 100% (1188/1188), done.
remote: Total 3708 (delta 2463), reused 3708 (delta 2463)
Receiving objects: 100% (3708/3708), 698.99 KiB | 133.00 KiB/s, done.
Resolving deltas: 100% (2463/2463), done.

Can you please share the failure logs for me to analyze what is going on at your end?

Best Regards,
Keerthy

0 khushboo singh over 5 years ago in reply to Keerthy J

Intellectual 890 points

Hi,

Thankyou for your reply, the following error message I am getting. Kindly help me out.

root@ubuntu:/home/ubuntu16/ti/processor_sdk_06_03_version# git clone git://git.omapzoom.org/repo/omapboot.git
Cloning into 'omapboot'...
fatal: unable to connect to git.omapzoom.org:
git.omapzoom.org[0: 198.47.23.32]: errno=Connection refused

root@ubuntu:/home/ubuntu16/ti/processor_sdk_06_03_version# git clone git.omapzoom.org/.../omapboot.git
Cloning into 'omapboot'...
fatal: unable to access 'git.omapzoom.org/.../': gnutls_handshake() failed: Error in the pull function.