PROCESSOR-SDK-AM437X: bootloader / building with IAR or CodeComposerStudio

Peter Wi

Intellectual 810 points

Part Number: PROCESSOR-SDK-AM437X
Other Parts Discussed in Thread: CODECOMPOSER

Hi,

i already can build the bootloader with the windows cmd.exe and gmake but...

is there any chance to get a project file (workspace file) for IAR Embedded Workbench to build the bootloader ?

is there any chance to get a project file (workspace file) for CodeComposer Studio to build the bootloader ?

thank you for your help !

Peter

over 5 years ago

0 Bin Liu over 5 years ago

TI__Guru**** 178011 points

Hi Peter,

Do you use Processor SDK RTOS release? If so, which version?

0 Peter Wi over 5 years ago in reply to Bin Liu

Intellectual 810 points

Hi Bin Liu,

i'm using Processor SDK RTOS AM437X 06.03.00.106

0 Bin Liu over 5 years ago in reply to Peter Wi

TI__Guru**** 178011 points

Hi Peter,

Thanks for the update. I am assigning this thread to the domain expert. Response will be posted here.

0 Frank Livingston over 5 years ago

TI__Mastermind 30108 points

Hi Peter,

Peter Wi said:

is there any chance to get a project file (workspace file) for IAR Embedded Workbench to build the bootloader ?

is there any chance to get a project file (workspace file) for CodeComposer Studio to build the bootloader ?

No, you'll need to figure this out on your own.

I suggest inspecting the bootloader command-line build output to understand the bootloader build, i.e. the compiler and linker options. These options can then be imported into an IAR or CCS project. You'll need to manually change the bootloader build file pdk_am437x_1_0_17\packages\ti\starterware\build\makerules\rules_a9.mk to see verbose command-line output.

Regards,
Frank

Processors

Processors forum

PROCESSOR-SDK-AM437X: bootloader / building with IAR or CodeComposerStudio