Other Parts Discussed in Thread: OMAPL138
TI,
In the “Windows Embedded CE 6.0 BSP for the OMAP-L13x/AM17x/AM18x User Guide” chapter 6.2 “EBOOT Features” it is stated:
The EBOOT implementation supports the following functionality:
…
- Flashing of CE images to NAND, NOR (OMAPL138_AM18X only)
- Boot CE image from NAND, NOR (OMAPL138_AM18X only), SD/MMC card
Is there a procedure available that describes flashing a CE image onto NAND flash and then subsequently booting the CE image from the NAND flash?
Best,
Nelson
