DRA80XMEVM: Differences with TMDX654IDKEVM

Koichiro Tashiro

Part Number: DRA80XMEVM
Other Parts Discussed in Thread: TMDX654IDKEVM

Hi,

My customer is thinking to buy one DRA80XMEVM.
In DRA80XMEVM website, there is only TMDX654IDKEVM in “order & start development”.
And all design files are the same for both TMDX654IDKEVM and DRA80XMEVM.
https://www.ti.com/tool/DRA80XMEVM

Are these two EVMs exactly the same? Any differences?

Thanks and regards,
Koichiro Tashiro

over 5 years ago

0 Vineet Roy over 5 years ago

TI__Mastermind 37435 points

What's the end use case ? IDK is focussed on industrial protocols and Ethernet development. EVM is for generic development.

I will point out to the team that design files are same.

Regards

Vineet

0 Koichiro Tashiro over 5 years ago in reply to Vineet Roy

TI__Mastermind 22945 points

Hi Vineet,

The end use case is train controller.

Vineet Roy said:

IDK is focussed on industrial protocols and Ethernet development. EVM is for generic development.

I knew it is the case for other devices, but it seems we have only DRA80XMEVM for DRA80M.
And it seems the EVM is the same as TMDX654IDK as far as I understood from TI.com.

Thanks and regards,
Koichiro Tashiro

0 Karthik Ramanan over 5 years ago in reply to Koichiro Tashiro

TI__Guru** 113810 points

Hi Tashiro-san,

That is correct. The EVM for DRA804M is reused from TMDX654IDK and they are the same.

Regards

Karthik

0 Koichiro Tashiro over 5 years ago in reply to Karthik Ramanan

TI__Mastermind 22945 points

Hi Karthik,

I see. So the customer just purchase TMDX654IDK for DRA80XM evaluation, right?
There is no DRA80XMEVM order page.

Thanks and regards,
Koichiro Tashiro

0 Vineet Roy over 5 years ago in reply to Koichiro Tashiro

TI__Mastermind 37435 points

Yes

Regards

Vineet

Processors

Processors forum

DRA80XMEVM: Differences with TMDX654IDKEVM