TDA2X-How to boot from SSD (Solid State Drive) after TDA2 is successfully compiled to generate Linux system

Annie Liu

Other Parts Discussed in Thread: TDA2

Hi Team,

The customer successfully compiled the linux system according to PROCESSOR_SDK_VISION_03_08_00_00_setuplinux.bin. Successfully boot from SD card.

The mmwcas_dsp_evm development board comes with a 512GB SSD. He wants to start the linux system from the SSD, is there any relevant guidance document for operation?

Best Regards,

Annie Liu

over 5 years ago

0 Keerthy J over 5 years ago

TI__Guru**** 166360 points

Hi Annie,

We do not have support for booting linux from SSD on TDA2. That is not supported on our SDK.

Best Regards,
Keerthy

0 Annie Liu over 5 years ago in reply to Keerthy J

TI__Genius 10295 points

Hi Keerthy,

Customer has follow-up questions that need your help.

Except booting from the SD card, is it able to boot from the SPI FLASH? If it supports SPI FLASH startup, how should it operate?

Best regards,

Annie

0 Keerthy J over 5 years ago in reply to Annie Liu

TI__Guru**** 166360 points

Hi Annie,

https://e2e.ti.com/support/processors/f/791/p/962457/3558003#3558003

As per the above thread only SD boot is supported on 3.8 VSDK.

Best Regards,
Keerthy

Processors

Processors forum

TDA2X-How to boot from SSD (Solid State Drive) after TDA2 is successfully compiled to generate Linux system