PROCESSOR-SDK-DRA8X-TDA4X: PSDKRA v7.1.0 installer always install itself into a very long path

Keelung Yang

Expert 1786 points

Part Number: PROCESSOR-SDK-DRA8X-TDA4X

Hi,

I installed it with --mode unattended --prefix ~/test/psdk/rtos, but it always install into a very long path:

~/test/psdk/rtos/ti-processor-sdk-rtos-j721e-evm-07_01_00_11

This happens in PSDKRA v7.1.0, not PSDKLA v7.1.0

over 4 years ago

0 Karan Saxena over 4 years ago

TI__Guru* 77754 points

Hi Keelung Yang,

The SDK will be installed by default in a directory named ti-processor-sdk-rtos-j721e-evm-07_01_00_1 , the ~/test/psdk/rtos comes from your prefix argument.

Regards,

Karan

0 Keelung Yang over 4 years ago in reply to Karan Saxena

Expert 1786 points

Hi Karan,

But PSDK for Linux don't need such long long directory name, why PSDK for RTOS need it? Shouldn't they keep some behaviour since they share the same UI of console?

0 Karan Saxena over 4 years ago in reply to Keelung Yang

TI__Guru* 77754 points

Hi Keelung Yang,

I will take this feedback to the team.

Regards,

Karan

0 Keelung Yang over 4 years ago in reply to Karan Saxena

Expert 1786 points

Hi Karan,

There must be somethong wrong.

In GUI mode, it always append user's name to the selected path.

This bebaviour isn't as the same as in it's CUI.

0 Karan Saxena over 4 years ago in reply to Keelung Yang

TI__Guru* 77754 points

Hi Keelung Yang,

You can always modify the path. As I can see in the picture, you can modify the path "/home/keelung/tmp/test/keelung" to just "/home/keelung/tmp/test"

Regards,

Karan

Processors

Processors forum

PROCESSOR-SDK-DRA8X-TDA4X: PSDKRA v7.1.0 installer always install itself into a very long path