CCS/PROCESSOR-SDK-OMAPL138: PROCESSOR-SDK-OMAPL138

Seyed Mohamed1

Part Number: PROCESSOR-SDK-OMAPL138
Other Parts Discussed in Thread: OMAPL138

Tool/software: Code Composer Studio

HELLO

#define TMR_PERIOD_LSB32 0x5DC0

In above i mentioned TMR period they did in 1millisecond. Can you explain please how they did calculation and how to set single input clock,

i'm trying to set in microsecond for single instruction but i didn't able to set.

over 5 years ago

0 Seyed Mohamed1 over 5 years ago

Intellectual 390 points

Part Number: PROCESSOR-SDK-OMAPL138

Tool/software: Code Composer Studio

Hello

I'm working in omapl138 and i have facing the issue in one wire interfacing through gpio pins so i need to toggle high and low for every bits in micro seconds. Previously i found a code here timer.c and i used those functionality i'm getting o/p like seconds but i want in micro seconds for one wire interfacing.Please help me i am facing this issue past one week.

Regards

Seyed

0 Rahul Prabhu over 5 years ago

TI__Guru** 116950 points

I am fairly certain that you are referring to Starterware code and not Processor SD RTOS. Please confirm.

If yes, please note that we are not currently supporting Starterware software for these devices. However, you can find the answer to your question based on previously answered question in this topic here:

https://e2e.ti.com/support/processors/f/791/t/558354?How-to-set-timer-interrupt-period-in-C6748-

Processors

Processors forum

CCS/PROCESSOR-SDK-OMAPL138: PROCESSOR-SDK-OMAPL138