TMDXICE110: Libraries/Stacks cost for industrial bus

Antonio Faggio

Part Number: TMDXICE110
Other Parts Discussed in Thread: AMIC110

Hi,

Regarding industrial buses: Ethernet, Profinet and EtherCAT.

I read the article:

https://e2e.ti.com/blogs_/b/industrial_strength/archive/2020/08/24/how-to-affordably-add-ethernet-ip-ethercat-and-profinet-to-an-autonomous-factory

on the Evaluation Board:

https://www.ti.com/tool/TMDXICE110

May I know the costs to implement this solution both at HW level and at SW level (any costs for the library/stacks here?)

• Any others?

Many Thanks,

Antonio

over 4 years ago

0 Srik Gurrapu over 4 years ago

TI__Expert 3352 points

Thank you for your email. It depends on the protocol - If it is EtherCAT, it is already included in the device pricing,. Other standards require the developer to work with different 3Ps for the AMIC110. Do you have specific standards you are looking for?

Please see this document for more details.

www.ti.com/.../sprach6b.pdf

thanks

Srik Gurrapu

Processors

Processors forum

TMDXICE110: Libraries/Stacks cost for industrial bus