TMS320DM816X connections with Audio CODEC

Chunte Li

How do I connect the Audio CODEC to the McASP interface? The Audio CODE has data_in, data_out, BCLK and WCLK. The McASP interface has separate BCLK and WCLK for each TX and RX. If this is not possible, what is the best way to connect the McASP to Audio CODEC/Transceiver? Or, separate AudioDAC and Audio ADC should be used? Thank you.

over 15 years ago

0 Nagabhushan Reddy over 15 years ago

TI__Intellectual 1305 points

Chunte Li,

Please refer to the McASP peripheral section of the following TRM

http://focus.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=SPRUGX8&fileType=pdf

Please refer the following section in the above document, which gives information on the synchronous transmit and receive operations using McASP.

10.2.10.5 Synchronous Transmit and Receive Operation (ASYNC = 0)

Regards,

Nag

----------------------------------------------------------------------------------------------------------------
Please click the Verify Answer button on this post if it answers your question
----------------------------------------------------------------------------------------------------------------

0 Nagabhushan Reddy over 15 years ago in reply to Nagabhushan Reddy

TI__Intellectual 1305 points

Chunte Li,

Is you question answered? Let me know if you need any further information.

Regards,

Nag

---------------------------------------------------------------------------------------------------------------------
Please click the Verify Answer button on this post if your question is answered
---------------------------------------------------------------------------------------------------------------------

0 Chunte Li over 15 years ago in reply to Nagabhushan Reddy

Prodigy 100 points

Hi Nag,

Thanks for answering my question. I am good with this issue now. Thank you.

Best Regards,

Chun-Te Li

Processors

Processors forum

TMS320DM816X connections with Audio CODEC