Couldn't work "uniflash" program as I upload the program.

hongsik Won

Other Parts Discussed in Thread: UNIFLASH

I tried to upload the program by using Uni Flash program, but it couldn't work well.

By the way, another PC is work well. just some of PC is not working correctly. So I'd like to listen how to set properties on window OS or Uniflash Program.

Thanks and best regards.

over 5 years ago

0 LeonardEllis over 5 years ago

TI__Guru 71526 points

Hello Hongsik,

What processor are you attempting to use with UNIFLASH?

Regards,

~Leonard

0 hongsik Won over 5 years ago in reply to LeonardEllis

Prodigy 70 points

I'm using the Ver.6.1.0

0 LeonardEllis over 5 years ago in reply to hongsik Won

TI__Guru 71526 points

Hello Hongsik,

What is the PROCESSOR you are attempting to flash?

~Leonard

0 hongsik Won over 5 years ago in reply to LeonardEllis

Prodigy 70 points

As I upload the program by tool, I can not upload. and I waited so long time but there were no response.

0 Ki over 5 years ago in reply to hongsik Won

TI__Guru**** 476481 points

Hello,

The link to your screenshot is broken. Please repost. If you continue to have issues, please see:

https://e2e.ti.com/support/tools/ccs/f/81/t/821597

Also please state which exact device you are using and which debug probe is being used with it.

Thanks

Processors

Processors forum

Couldn't work "uniflash" program as I upload the program.