AM5726: Target connect failed

Sh.Sasaki

Guru 13625 points

Part Number: AM5726

Hi,

When I connect to the target with CCS, it stops at the following initialization.

CortexA15_0: GEL Output: --->>> IPU2SS Initialization is in progress ... <<<---

Do you know why the initialization here stops?

My environment:

HW : AM572x EVM, XDS200(Spectrum digital)
SW : CCSv10.1, processor_sdk_rtos_am57xx_6_03_00_106

Best regards,
Sasaki

+1 Stanley Liu over 5 years ago

Hi,

Please refer to the GEL scripts under ~/ccs/ccs_base/emulation/boards/am572x/gel/AM572x_multicore_reset.gel.

You can add some more trace via GEL_TextOut() to see where it stuck in the script.

The function is IPUSSClkEnable() in AM572x_multicore_reset.gel.

Please make sure the EVM doesn't have any binary running when you try to connect it in CCS.

Regards,

Stanley

0 Sh.Sasaki over 5 years ago

Guru 13625 points

Hi Stanley-san,

Thank you for your reply.

I will investigate with reference to your advice.

Best regards,
Sasaki

Processors forum