• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 236 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

debug mode ccs3.3

talmor zilberman
Expert 1160 points


 

Hi folks,

Is there any way to watch the spi periperal registers with ccs3.3 (debug mode)?

when I open the registers window I can only watch 4 peripheral registers: IODIR, IODATA, REV, DIE

Talmor

  • 0
    TI__Genius 14965 points

    Hi,

     

    You can see values in the memory pan.

    In CCS3.3, Select View menu --> select Memroy --> select I/O (lower right DATA/PROGRAM/I/O) --> Enter SPI register address in the "Enter An address" (Hex format ie. 0x2800)

    Regards,

    Hyun