AM1808 WinCE 7.0 & QNX supprt

Hi -

Though I'm not familiar with what's available for WinCE 7.0, there is QNX support for both the AM1808 and the OMAPL138 (same as the AM1808 + DSP). The QNX BSP, of course, is not only for the CPU, but also to support the board as well. I believe there is a port of QNX for the EVM, but know that there is a QNX port for the MityARM-1808 and MityARM-1808F - AM1808 based SoM's.

Tom

I can confirm that there is no WinCE 7.0 support on AM1808 device

Atul

This table may help: http://focus.ti.com/dsp/docs/dspfindtoolswbytooltype.tsp?sectionId=3&tabId=2095&toolTypeId=5&familyId=44