Original question:
Hi
My customer recently changed the lens with different distortion ratio. Hence they need to get a new LDC LUT (i.e. ldc_lut_1920x1080.h).
Could you please let me know how to support them? I saw there're LDC tools under NDA.
Please clarify on this. Thanks !
Best Regards,
Jack Cha
Yes, there is a DCC tuning tool for VPAC that can help you with LDC programming and parameter optimization.
You may check with your local TI representatives to get it.
You will also need to take a look at the following code for generating the LUT input for the tuning tool.
You shall be able to get the lens distortion curve from the lens vendor.
