SPI Flash Programmer

Dani Vain

Hi,

We use dm6435 in our system, connected with SPI flash.

How if at all can I prgroamm SPI flash via JTAG?

Is TI or some third part has utility on the PC side and programm on the embedded side to programm SPI flash in any other way?

Thanks

Dani

over 14 years ago

0 David Friedland over 14 years ago

TI__Mastermind 18320 points

Dani,

This question doesn't appear to be BIOS specific. I will go ahead and move this to a different forum in hopes that it can get a faster response there.

Dave

0 Varada Bellary over 14 years ago in reply to David Friedland

TI__Expert 5750 points

Can you please explain how serial flash is connected to the DM643x device ?

0 Dani Vain over 14 years ago in reply to Varada Bellary

Intellectual 385 points

Hi,

SPI flash conencting to DSP via McBSP.

Dani

0 Varada Bellary over 14 years ago in reply to Dani Vain

TI__Expert 5750 points

I do not find any example code to program SPI Flash over McBSP.

You can search for 3Ps at : http://focus.ti.com/dsp/docs/thirdparty/catalog/searchcatalog.tsp

Processors

Processors forum

SPI Flash Programmer