• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 100 subscribers
  • Views 243 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM: Vision_sdk : 3D surround-view application and multicam application display output is distorted while changing the application continuously

Kishore Mali
Intellectual 315 points
Part Number: TDA4VM

Hi,

I am facing issue  when launching 3D surround-view application and multicam  application and vice versa.

The display is distorted.

This issue is not frequently occurring. If I run any camera based app, this distortion issue I am facing which is not frequent.

Steps followed :

1. >cd /opt/vision_apps
2. >source ./vision_apps_init.sh
3. >./run_app_srv.sh
4. Press x (to exit)
5. >./run_app_multi_cam.sh
6. Press x (to exit)
Go to Step 3.
Follow this steps multiple times.
I am giving sufficient time to launch the application and deinit them.
I have written an application also to launch and exit these application with proper wait time, behavior is same as we do it manually step by step.
Regards,
Kishore