TMDXICE110: Replace DP83822 by DP83826

Hello Charles,

Sending your question over to the PHY team to comment.

Regards,

Nick

Hi Charles,

No, the devices are not pin-to-pin compatible.

Here are the links to the 822 and 826 evms so that you can use those schematics as reference.

https://www.ti.com/tool/DP83826EVM 

https://www.ti.com/tool/DP83822EVM 

When switching from one PHY to the other, you will have to change your design and BOM.

Kind Regards,

Joe

All information in this correspondence and in any related correspondence is provided “as is” and “with all faults”, and is subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml)