Texas Instruments (TI) Processors support forum is an extensive online knowledge base where millions of technical questions and solutions are available 24/7. You can search processors content or ask technical support questions on Sitara™ processors, digital signal processors (DSP) and automotive processors. Find the right solution for your circuit design challenges by using our TI E2E™ support forums that are supported by thousands of contributing TI experts.
Frequent questions

  • [FAQ] AM62x: How to customize eMMC and OSPI flash layout for SPL/u-boot booting with TI AM62x Linux SDK

    Part Number: SK-AM62 I am attempting to boot the AM62x SK EVM from eMMC and OSPI. The board I have is revision PROC114E1. I am using the TI provided SD-Card image located here: https://dr-download.ti.com/software-development/software-development…

  • [FAQ] AM6412: Passing USB compliance test patterns trhough a USB 2.0 hub

    Part Number: AM6412 Hi TI, I can generate USB compliance test patterns on AM64 SoC by the following command # devmem2 0x0f410480 w 0xA0 # devmem2 0x0f410080 w 0x4 # devmem2 0x0f410484 w 0x40000000 However, the test pattern stops transferring…

  • [FAQ] AM6412: USB compliance test pattern generation

    Part Number: AM6412 Hi TI, How to generate USB compliance test from CPU In Linux kernel 5.10 on AM64xx. I followed the instructions below. TDA4VM: USB 2.0 host test mode Set dr_mode to host. # cat /proc/device-tree/bus\@f4000/cdns-usb…

  • [FAQ] SK-AM62: how to disable the HMI demo

    Part Number: SK-AM62 Hello. i am working with linux arago default image for am62 evaluation board. I am trying to understand how reduce boot time, and get command prompt as fast as i can. Just to have an idea of how to speed up this, i would like…

  • [FAQ] TDA4VM: PDK Interrupt registration for R5F using OSAL

    Part Number: TDA4VM This document is intended to explain the interrupt registration process for R5F cores used in TI PDK

  • [FAQ] PROCESSOR-SDK-AM64X: AM64x/AM243x SR 2.0 Device Type Transition

    Part Number: PROCESSOR-SDK-AM64X If you you are having trouble booting an AM64x or AM243x based board with Processor or MCU+ SDK v8.4, please see the below information. Overview With the production release of Silicon Release 2.0 (SR 2.0) of the…

  • [FAQ] 66AK2H12: How to create "Target configuration" and do "Test connection" on K2H EVM

    Part Number: 66AK2H12 Hi, How to create "Target configuration" and do "Test connection" on K2H EVM ?

  • [FAQ] 66AK2H12: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2H 6.3 for K2H?

    Part Number: 66AK2H12 Hi, How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2H for K2H?

  • [FAQ] 66AK2E05: How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E 6.3 for K2E?

    Part Number: 66AK2E05 Hi, How to re-build the PDK and SDK of PROCESSOR-SDK-RTOS-K2E for K2E?

  • [FAQ] Edge Impulse Setup on TI Processors (ARM-only)

    Part Number: SK-AM62 Other Parts Discussed in Thread: TDA4VM Hello, Edge Impulse is a tool for creating, analyzing, and deploying machine learning to embedded targets. TI Processors, like the AM62x and TDA4VM, running the default Processor SDK for…

View FAQ threads
  • Threads 197892 Discussions