This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE7700: Trouble reading the temperature sensor via macro interface protocol

Part Number: AFE7700

Hello,

I am trying to read the value of the temperature sensor in the AFE7700 chip. I have trouble using the Macro Interface Protocol. The RegPoll on 0x00f0 is never equal to 1.

a) Is there an easier way to read the result status register without the macro interface protocol?

b) If not, can you help me please? I thought I had correctly done the SPI access to initiate the macro trigger (with the RegPoll of 0x0f0).

Thank you very much,

Theo