This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
when I set the ICP register to {0x60100029,0x88A009CA,0x3158106B,0xCA04300C,0x8D23968D,0x9590100E,0xD041100F},the cpout pin voltage is about 3.23v.When I change the register to {0x63F00029,0x88A009CA,0x3158106B,0xCA04300C,0x8D23968D,0x9590100E,0xD041100F},the cpout pin voltage is 3.29v.
Here is the schematic and pcb,is there any problem?
Hello
I recommend you cross check your configuration of the TRF372017 setup by using the configuration generated in the GUI
download from the TRF373017 EVM GUI page
https://www.ti.com/tool/TRF372017EVM
you may use the GUI in simulation mode and generate the configuration using your reference input and output
You can also cross check your schematic against the EVM schematic to see if there are misconfigured componenents.
Kang