MMWCAS-RF-EVM: MMWCAS-RF-EVM test

Hello User,

The simplest test that can be used to verify Rx and TX paths is to do actual radar measurement using a corner reflector kept at a fixed distance in front of the radar sensor and verify that the received data shows the peak at the right distance and the amplitude of the peak is as expected.

You could start with mmWave Studio as a first step and try to capture some data. 

MMWAVE-STUDIO-2G_03.00.00.14 | TI.com 

Please refer to mmwave_studio_cascade_user_guide.pdf for detailed instructions. 

Regards,

Ishita