• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 282 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: DataCaptureDemo_xWR figure results always the same when using DCA1000EVM + AWR1642BOOST

austin ben
Prodigy 10 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: AWR1642BOOST

Hi Expertor

    I have the AWR1642BOOST and DCA1000EVM to capture data. I had sucessfully ran the script DataCaptureDemo_xWR.lua in  mmWave Studio 2.1.1.0. But the problem is the PostProcess figure looks always the same ,no matter how I move far or close to the attennas, such as 3meters or 10 cm. find the screenshot as following. 

   Please help me figure if any configuration I messed up , or I missed anything. Thanks in advance.