This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.


Part Number: DRV425-BUSBAR-EVM
Other Parts Discussed in Thread: DRV425


I am trying to measure the rms noise level of DRV425 using its evaluation kit. I am using 24 bits ADC and ADC's measured rms noise level is under 10uv, but when I am connecting the DRV425 output and its reference voltage to the ADC in the differential mode, the rms noise that I am measuring is over 50uv. According to the datasheet it suppose to be under 20uv (17nTrms) with the resistor that I am using. 

Please let me know how I can reach to this noise level.