• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TMP461-SP: What resistor value can be used to connect A0 and A1 pins to VCC or GND

TMP461: Pull-up resistor on A1 and A0 pin

Ella KIM
Expert 4012 points
Part Number: TMP461

Hi Temp Sensor Folks,

Could you help me to get answer on the related thread? My customer also connects 10kohm resisor to 3.3V V+ power rail on A0 and A1 pin and the address is not properly read. What's the minimum pull-up strength required for A1 and A0 pin?

Thanks,