IWR1443BOOST: detection and identification of metal objects

Hello Aarzoo,

You have already asked this question at the link below and received advice. 

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1082699/iwr1443boost-metal-detection-using-iwr1443boost

You will need to do some experiments with metal and different materials to see if you can identify and recognize different signatures. In general, you will need to look at reflected signal strength of the metal objects. I suggest you start with the range angle heatmap to see if the metal objects you want to detect are visible. But if the objects are very small and in a cluttered environment, it will be very difficult to distinguish them.

Regards,

Jackson