IWR1443BOOST: Minimum detectable distance for IWR1443BOOST

Sruthy Skaria

Part Number: IWR1443BOOST

Hi,

I would like to know the minimum detectable range of the IWR1443BOOST sensor. I could not find it in any documentation. Would you be able to point me to the documentation which describes the minimum detectable range?

Thanks,

Sruthy

over 3 years ago

0 Ishita Kochar over 3 years ago

TI__Mastermind 31680 points

Hello Sruthy,

This depends on the device and chirp configuration.

For a start you can take a look at the mmWave Sensing Estimator to evaluate the minimum detectable range based on your config. Here is the link to the tool : https://dev.ti.com/gallery/view/mmwave/mmWaveSensingEstimator/ver/1.4.0/

Also, This question has been addressed by our experts various times in the past. Please look at some similar threads on the TI E2E Forum for this purpose. You could use your local site search engine to look for them. Just Type "site e2e.ti.com 1443 minimum range".

Below are some threads produced by the same method :

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/667524/iwr1443-the-minimum-detectable-range-of-iwr1443

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/791734/iwr1443boost-minimum-distance-for-object-detection/2928027#2928027

Hope this helps.

Regards,

Ishita

Sensors

Sensors forum

IWR1443BOOST: Minimum detectable distance for IWR1443BOOST